Huber KISS E Immersion Heater

$ 1,540.00

HuberHuber
Immersion thermostats are suitable for controlling the temperature of any bath as the screw clamp allows the thermostats to be easily mounted on different vessels. Minus temperatures are achieved in combination with a refrigerated bath or immersion cooler. All models are fitted with a powerful pressure/suction pump and meet the requirements of Safety Class III (FL) for use with flammable fluids. A pump adapter for external temperature control and cooling coils for a cooling water connection are available as accessories.  
 The new KISS controller combines state-of-the-art technology with simple operation and stylish design. KISS models are suitable for routine tasks in research and industry and are convincing as practice oriented basic equipment. Option: Pt100 sensor connection #10519 to display (not control) e.g. of the process temperature (only available factory fitted, additional charge).
 
KISS temperature controller    
Bright, large OLED display    
Simple operation with menu navigation    
Simultaneous display of setpoint, Tmin, Tmax and actual temperature    
Status displays for pump, cooling and heating    
Overtemperature and low level protection    
Safety class III/FL (DIN 12876)    
USB and RS232 interfaces    
Autostart function for power failure    
3 colour versions available: grey (standard), blue, red    
  
 
General information & temperature controller 
Temperature range  (-30) 25...200 °C
Temperature stability ±0.05 °C
Temperature display  OLED Display  
Alarm message  optical, acoustical  
Controller KISS   
Safety class  III / FL  
Protection class  IP20  
Dimensions (W x D x H) 132 x 163 x 312 mm  |  5.2 x 6.42 x 12.28 inches
Weight 4 kg  |  8.82 pounds
Heating / cooling capacity 
Heating capacity  1-1,5  kW
Circulation pump  
Pressure pump max.  14  lpm ; 0.25  bar  |  3.7 gpm ; 362.5 psi
Suction pump max.  10.5  lpm ; 0.17  bar  |  27.74 gpm ; 246.5 psi
Pump connection  -- (Option, #19606 )  
Connections 
Digital interface  USB, RS232  
Operating data
Permissible ambient temp. 5...40 °C
Power supply 100-115V 1~ 50/60Hz   
Miscellaneous
Please take further technical information as well as information about the scope of delivery, accessories and peripheral devices from the PDF data sheet. In cases of doubt the details given in there apply. If nothing to the contrary is quoted then the performance data referred is at an ambient temperature of 20°C.

Please observe the 
notes on installation and/or the space requirements of our products.

The following voltage and frequency tolerances apply based on EN60034-1:
Voltage +/- 5% for a frequency tolerance at the same time of +/- 2%

Examples to illustrate this: Not permissible, for example. is -5% on the voltage and +2% on the frequency. Permissible, on the other hand, are tolerances of -5% on the voltage and -2% on the frequency.

We reserve the right to make technical changes and correct errors. Illustrations can deviate from the original.