Cascade Sciences CVO-2 Vacuum Purge Oven

$ 4,390.00

FREE SHIPPING!

Cascade’s CVO-2 Benchtop Vacuum Oven for Temperature Sensitive Products
Cascade’s Model CVO-2 offers incredible temperature stability for vacuum drying and purging of pharmaceuticals, botanicals, slurries, or any temperature sensitive material. This vacuum oven liberates solvents, water, and other unwanted compounds. It’s ideal for small batch, R&D and laboratory environments.

Processing Range:  26°F to 250°F (121°C)

Temperature Uniformity: +/- 1.5°F @ 105°F (40.5°C)

Temperature Stability: +/- 0.4°F @ 105°F(40.5°C)

 

Product Advantages:

The Cascade Difference

Vacuum ovens have been around for decades. Basic vacuum ovens are mass-produced and sold by many large scale laboratory equipment distributors. But there are key differences between Cascade and other less costly, often imported vacuum ovens:

Exceptional Temperature Control & Stability
The Cascade CVO-2 uses a unique control logic not found in most lab grade vacuum ovens. The temperature probe is INSIDE the oven, which minimizes temperature overshoot and delivers best-in-class temperature stability and uniformity particularly in the low temperature ranges. Accurate, stable temps throughout the CVO-2 eliminate hot and cold spots, making accurate use of every inch of shelf space.

Independent Overtemp Failsafe Protection
The Cascade Sciences CVO-2 is equipped with a heating cutoff system that will automatically stop power to the heaters when the oven shelf temps exceed 392°F or 200°C. This protection system will provide peace of mind for overnight processing or unattended vacuum bake outs.

NRTL Certification #U8 170464972 077. No Extra cost.
The CVO-2 Vacuum Oven comes certified by the Nationally Recognized Test Lab, TUV. This certification is a requirement by many municipalities.

  • CAN/CSA-C22.2 No. 61010-1:2012
  • +UPD No. 1:2015-07 + UPD No. 2:2016-04
  • CAN/CSA-C22.2 No. 61010-2-010:2015
  • UL 61010-1:2012/R:2016-04
  • UL 61010-2-010:2015
  • EN 61010-1:2010
  • EN 61010-2-010:2014

Rigorous Quality Assurance in an ISO Certified, USA Manufacturing Facility
Cascade Sciences manufactures our ovens in Oregon, USA. We are proud of our ISO 9001 Certification/Accreditation. Each oven completes a series of quality assurance procedures before shipment:

  • Chambers are vacuum tested after welding for vacuum integrity
  • Electrical & mechanical safety is thoroughly tested in compliance with TUV requirements
  • Functional testing verifies user settable items consistent with most lab protocols/usage models
  • Temperature verification includes calibration & temp chamber uniformity following ASTM standards
  • Units are cleaned and packed in ISTA tested, certified packaging materials

Digital Vacuum Gauge
The digital vacuum gauge installed on the CVO-2 is factory default set to read in inches of mercury (“Hg) with a scale of 0 – 29.9”Hg. Change the unit of vacuum measurement to read in a wide variety of units from mmHg, bar psi, kPa, cm2, mmH20. Zero out the vacuum gauge to calibrate for just above sea level adjustments.

Log Temperature & Vacuum With Data Port
The CVO-2 features a rear mounted data port which outputs a digital log line once per minute. Viewing/logging this data requires terminal emulator software such as the open source (BSD License) emulator Tera Term.

Equipped for Inert Gas Backfill. Built-In Safety Relief
Introduce inert gasses such as nitrogen, argon, helium, etc. as part of your process via the ¼” rear vent barb. The maximum backfill pressure is 15PSI. In an overpressure situation, a simple, built-in safety relief allows gasses to escape via a spring loaded tempered window.

Flexible Pumping / Feedthru Connection Ports
The CVO-2 ovens offer two different vacuum oven connection points. The standard connection is a 3/8th dia barb located at the rear of the oven. It is connected to the vacuum valve level on the front control panel. For even faster evaporation, purging or drying consider upgrading to the MAX EVAP connection kit. The MAX EVAP connection kit secures to the oven’s rear 1” dia KF-25 port located on the back center of the chamber. The MAX EVAP connection never reduces flow by continuing with 1” diameter vacuum rated clear lines, a 1” dia KF-25 side mounted vacuum valve and KF-25 fittings and hardware. This KF-25 port can also be used to run temperature feedthrus, or monitoring sensors inside the vacuum chamber during processing.

Stackable Shelf Design For Maximum Temperature Conduction
Under vacuum, there is no air inside a vacuum oven. Temperatures are achieved by a process of conduction and radiation to move temperatures into the product inside the oven. Cascade’s stackable shelf design makes the most of this opportunity by making the chamber longer and narrower, rather than square and supplies stackable shelves in multiple height configurations to allow for the fastest, most uniform transfer of heat.

Ergonomically Designed, Easy Quarter-Turn Valves
For anyone that has struggled with consistently turning the small, round, low-quality vacuum/vent valves, relief is in sight. You will love our large, quarter-turn vacuum/vent valves. Your wrists will thank you!

ANSI Rated Tempered Glass + USA Made Steel
Cascade ovens are made in Oregon, USA with high quality materials. Our glass is NGI-USA Tempered and certified to ANSI Z97.1.2007  16CFR / 201 11. Our door handles are rugged brushed steel, not plastic. Our vacuum vessels are constructed with American made steel. We’ve tried lower cost, imported steel, but over time, vacuum chambers made of lesser quality/lower tolerance material cannot withstand the flex and pressure changes of vacuum pumping/venting/purging. This can deteriorate vacuum integrity and the oven will lose its ability to hold vacuum.

Door Gasket Options – Ideal For Your Process
Cascade’s vacuum ovens come standard with a solvent resistant BUNA door gasket. For higher temp applications, we offer a cured Silicone gasket as well. Ask us about the variety of door gaskets we can supply based on your application: Silicone, BUNA, Viton, Flourasilicone. Gaskets will eventually wear out. It’s ideal to keep a few spares on hand.

Features:

  • NRTL Certified by TUV
  • Flexible shelving configuration of 5 each 11.5″ x 19″  stackable shelves
  • Stable temperature control. Digital temperature readout with temp sensor INSIDE the oven
  • Solvent resistant BUNA door gasket
  • Bright LED lights in window for visibility of sensitive material
  • Digital vacuum gauge reads in inches of mercury
  • Smooth, quarter-turn vacuum and vent valves
  • Rear KF-25 port allows for rapid MAX EVAP purging or running feedthroughs inside oven for monitoring
  • 120V or 220V power options are available
  • Quality Tempered Rated Glass NGI-US to ANSI Z97.1.2007  156CFR/201 11  SGCC -2577 ½ UA
  • Adjustable leveling feet insure your unit sits solid and level in the workspace

Vacuum Valve: ¼ Turn Lever

Vent Valve: ¼ Turn Lever

Interior Lighting: LED Strips (Rated to 150C)
Glass Window: Tempered NGI-US to ANSI Z97.1.2007

Vacuum Gauge: Digital. 0 to 29.9”Hg | Reads in mmHg, bar psi, kPa, cm2, mmH20

Temperature Controller

Digital Set Point
Accurate Within 1°F
Independent Overtemp Failsafe

Ports(Rear)

Vacuum = 3/8th Barb
Vent = ¼” Barb
Auxiliary KF-25 Port
Data:  Log temp & vacuum levels

Inert Gas Introduction

Yes. Via ¼” Vent Barb
15 psi max inlet pressure

Power Options

110V – 120V / 1ph / 6A  50/60Hz | Cord Included
NEMA 5-15 Power Outlet
Full Power 2456 BTU/hr

220V – 240V / 1ph / 4A 50/60Hz | Cord Included
NEMA 6-15R Power Outlet
Full Power 3275 BTU/hr

Shelving

Comes with 5 in a flexible configuration
1” High = 1 each
2” High = 2 each
3” high = 2 each

Surface Area: 12″W x 19.5″D
Weight Capacity: 50 lbs

All shelves are adjustable.

Door Gasket

12” x 12”

Comes with Solvent Resistant BUNA Standard rated to 221°F to 105°C

Compatible With:
High Temp Silicone rated to 446°F to 230°C

Viton rated to 401°F to 205°C

WEIGHT

148 lbs | 67.1 Kg
Shipping Weight: 183 lbs / 83 Kg

Shipping Dimensions: 33”L x 33”W x 47”H | Class 85

Certification

ISO 9001
NRTL TUV #U8 170464972 077
CAN/CSA-C22.2 No. 61010-1:2012
+ UPD No. 1:2015-07 + UPD No. 2:2016-04
CAN/CSA-C22.2 No. 61010-2-010:2015
UL 61010-1:2012/R:2016-04
UL 61010-2-010:2015
EN 61010-1:2010
EN 61010-2-010:2014

WARRANTY: 1 Year (gaskets not included)

Questions?

Call 503-847-9075 x1